Natural Linen Roman Blinds - Cotton And Thermal Lining

For the inside-mount blinds:

• Do you wish inside-mount blinds? Check if the window casing has enough depth 
• Measure Width: Measure the inside width of the window casing at the top of the window.
• Measure Height: Measure the inside height from the top of the window casing to the top of the sill in three places. Record the longest measurement.

Note: To make sure your shade fits as well as possible, choose a whole-cm width that is at least 1 cm smaller than your window. Round down if needed to get the correct width.

This type of mounting will have a light gap. The blind must be slightly smaller than your window to ensure the best fit, so, this will affect the darkening level of the room if this is important and you choose blackout-lined blinds.

For the outside mount:

• Measure the width to be covered. The overlap of 5-10 cm from each of the sides is recommended for privacy and light-blocking
• Measure Height. Choose the roller location, then measure the height from the roller to the sill or to the bottom of the blind.

If you are not sure about your measurements, please message us. Our managers will also message you for confirmation before sending the order to production.

The blinds are custom made and we do not accept returns unless there are errors on our part.

• We recommend dry cleaning for Roman blinds
• Do not bleach
• Lightly iron if necessary with a low heat setting
• Easier to iron while damp